99在线精品视频-美国小密桃-非洲xxxx-男女啪啪做爰高潮无遮挡|www.bjytdf.com

徐工RP951瀝青攤鋪機配件及維修

福格勒攤鋪機彈性連接體#171600

文章出處:工程機械之家http://www.700618.com/人氣: 發表時間:2023-04-27 09:44:35

連接體是可摘局部義齒的主要組成部分之一,它將義齒的各部分連接在一起,同時還有傳遞和分散牙合力的作用,有大連接體和小連接體之分。 大連接體亦稱連接桿,主要有腭桿、舌桿、腭板、舌板、唇桿等,其作用為: (1)連接義齒各部成為一個整體,傳遞和分散牙合力至基牙和鄰近的支持組織,以減少基牙在功能狀態時所承受的扭力和負荷。 (2)大連接體的使用可減少基托面積,并可增加義齒的強度。 小連接體的作用是把金屬支架上的各部件,如卡環、支托等與大連接體相連接。它與大連接體應呈垂直相連,需離開牙齦少許。經過牙齒表面時,應較細,以免影響舌的運動。應放在非倒凹區,否則影響義齒就位。需放在牙齒的鄰間隙內并呈光滑表面,無銳角,無間隙,要有足夠的強度和硬度,以便分散牙合力。

 免責聲明丨 部分內容來源網絡!本文僅供交流學習 , 版權歸屬原作者,部分圖片、內容推送時未能及時與原作者取得聯系,若來源標注錯誤或侵犯到您的權益煩請告知,我們將立即刪除.

企業介紹

公司供應攤鋪機配件,壓路機配件,銑刨機配件,攤鋪機刮板驅動軸,刮板驅動軸總成,找平儀,找平儀支架以及液壓泵和配件。我廠還供應攤鋪機易損件,攤鋪機平衡梁,攪龍軸,踏板,輸料底板,葉片,熨平板,減速機,鏈軌,履帶板,支重輪,刮板大鏈條,輸料鏈條等。

聯系人:梁經理

聯系方式:13645201509(微信同號)

QQ:2870202745

Connector is one of the main components of removable partial dentures, which connects the various parts of the denture together and also transmits and disperses occlusal force. There are two types of connectors: large connector and small connector. Dalian connector, also known as connecting rod, mainly includes palatal rod, tongue rod, palate plate, tongue plate, lip rod, etc. Its function is to: (1) connect the various parts of the denture into a whole, transmit and disperse occlusal force to the abutment and adjacent supporting tissues, to reduce the torque and load borne by the abutment in its functional state. (2) The use of Dalian connectors can reduce the base area and increase the strength of dentures. The function of the small connector is to connect various components on the metal bracket, such as snap rings, supports, etc., to the large connector. It should be vertically connected to the Dalian junction and need to be slightly away from the gums. When passing through the surface of teeth, it should be thinner to avoid affecting the movement of the tongue. It should be placed in a non concave area, otherwise it will affect the placement of the denture. It needs to be placed in the adjacent space of the teeth and have a smooth surface, without sharp corners or gaps, with sufficient strength and hardness to disperse the occlusal force.

 

Disclaimer | Part of the content comes from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly communicated to the original author during push notifications. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

 

Enterprise Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies vulnerable parts of paver, balance beam of paver, auger shaft, pedal, conveying bottom plate, blade, screed, reducer, chain rail, track plate, supporting wheel, scraper large chain, conveying chain, etc.

 

Contact person: Manager Liang

 

Contact information: 13645201509 (same WeChat account)

 

QQ:2870202745

上一篇:料位器線#040602 下一篇:沒有了